=== Start of Crashinfo Collection (11:17:06 PCTime Wed Jan 24 2007) ===
First i want to ask what means problem in CPUvector 1400 because i searched it int the net but with no results for now.
I think that upgrade to higher version will solve the problem , but the funny thing here is that i have 11 router like the one with the rebooting problem. They are all configured in same configuration, IOS version , modules ,etc
like the rebooting router and everything it's ok with them.
I think the following info is needed
Cisco IOS Software, C181X Software (C181X-ADVIPSERVICESK9-M), Version 12.4(2)T1,
RELEASE SOFTWARE (fc3
ROM: System Bootstrap, Version 12.3(8r)YH5, RELEASE SOFTWARE (fc1)
System image file is "flash:c181x-advipservicesk9-mz.124-2.T1.bin"
Re: Unexpected exception to CPUvector 1400 problem on route 1811
Thnaks for the perfect answer. According to the CSCsa79340 bug i found another forum post saying a problem like mine. There is memory leak after specific amount of denys ACL was logged , causing router reload wich is exactly my case. I'll try stop logging for the current ACL and test , or upgrade to the 12.4(4)T1 . Thanks again for the troubleshooting ;-)
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...