Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

unknown flash device - mandev code = 0xd01e

Cisco 806 router cannot read Flash memeory and boots directly to RomMon. It acts as though there is no Flash installed.

Does this router come with 8MB Flash built in?

I see I can purchase additional 4MB or 8MB cards for it, but thought there was some permanently installed.

Any suggestions for how to get this up and running would be appreciated.

C800/SOHO series (Board ID: 17-100) platform with 32768 Kbytes of main memory

get_man_dev:  Unknown flash device 0xd01e.
unknown flash device - mandev code = 0xd01e
getdevnum warning: device "flash" has size of zero
get_man_dev:  Unknown flash device 0xd01e.
unknown flash device - mandev code = 0xd01e
getdevnum warning: device "flash" has size of zero
open: read error...requested 0x4 bytes, got 0x0
trouble reading device magic number
boot: cannot open "flash:"
boot: cannot determine first file name on device "flash:"
get_man_dev:  Unknown flash device 0xd01e.
unknown flash device - mandev code = 0xd01e
unable to get flash info...aborting
get_man_dev:  Unknown flash device 0xd01e.
unknown flash device - mandev code = 0xd01e
unable to get flash info...abortingÿ
System Bootstrap, Version 12.2(4r)XM2, RELEASE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 2002 by cisco Systems, Inc.
get_man_dev:  Unknown flash device 0xd01e.
unknown flash device - mandev code = 0xd01e
unable to get flash info...aborting
get_man_dev:  Unknown flash device 0xd01e.
unknown flash device - mandev code = 0xd01e
unable to get flash info...aborting
get_man_dev:  Unknown flash device 0xd01e.
unknown flash device - mandev code = 0xd01e
unable to get flash info...aborting
get_man_dev:  Unknown flash device 0xd01e.
unknown flash device - mandev code = 0xd01e
unable to get flash info...aborting
get_man_dev:  Unknown flash device 0xd01e.
unknown flash device - mandev code = 0xd01e
unable to get flash info...aborting
get_man_dev:  Unknown flash device 0xd01e.
unknown flash device - mandev code = 0xd01e
unable to get flash info...aborting
C800/SOHO series (Board ID: 17-100) platform with 32768 Kbytes of main memory

get_man_dev:  Unknown flash device 0xd01e.
unknown flash device - mandev code = 0xd01e
unable to get flash info...aborting
get_man_dev:  Unknown flash device 0xd01e.
unknown flash device - mandev code = 0xd01e
unable to get flash info...aborting
get_man_dev:  Unknown flash device 0xd01e.
unknown flash device - mandev code = 0xd01e
unable to get flash info...aborting
get_man_dev:  Unknown flash device 0xd01e.
unknown flash device - mandev code = 0xd01e
unable to get flash info...aborting
rommon 1 > meminfo

Main memory size: 32 MB.
Available main memory starts at 0x1b000, size 32660KB
IO (packet) memory size: 25 percent of main memory.
NVRAM size: 128KB
rommon 2 > dir flash: flash
get_man_dev:  Unknown flash device 0xd01e.
unknown flash device - mandev code = 0xd01e
getdevnum warning: device "flash" has size of zero
get_man_dev:  Unknown flash device 0xd01e.
unknown flash device - mandev code = 0xd01e
getdevnum warning: device "flash" has size of zero
get_man_dev:  Unknown flash device 0xd01e.
unknown flash device - mandev code = 0xd01e
getdevnum warning: device "flash" has size of zero
get_man_dev:  Unknown flash device 0xd01e.
unknown flash device - mandev code = 0xd01e
getdevnum warning: device "flash" has size of zero
open: read error...requested 0x4 bytes, got 0x0
trouble reading device magic number
dir: cannot open device "flash:"

rommon 6 > dev
Devices in device table:
        id  name
    flash:  flash

Thanks,

Jesse

Everyone's tags (2)
488
Views
0
Helpful
0
Replies
CreatePlease to create content