We have installed an 871 ethernet Router in our network. DNS DHCP servers are disabled. Simple static IP addressing. one simple static route configured. Have configured the simple SDM firewall.
We are natting the static hosts with the router Static global ip address. We see continuous Tx, Rx indications on the router front panel,even with nothing connected to the router. The ISP has assured us that our connection is static, not DHCP. Is there a simple explanation and cure for this problem? How can I setup logging to see what is going on? I have Telnet and FTP connection through the console port to a monitor PC.
CDP is disabled. I got hold of a Cisco document- "Cisco Guide to Harden Cisco IOS Devices". It has a list of services that should be disabled if not used. I guess I will have to work my way through the list. Thanks for your help, it is greatly appreciated.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...