Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Upgrade ROMMON on new Sup 720 3B / 6509

Having spot of trouble getting this to work - I have the new ROMMON image loaded OK but the original ROM files loads into memory.

1 REPLY
Silver

Re: Upgrade ROMMON on new Sup 720 3B / 6509

To upgrade the ROMMON version on a Supervisor Engine 720 or the Supervisor Engine 720-10GE running the Catalyst operating software, perform these steps:

Step 1 Check the active ROMMON information:

Console> (enable) rommon show

Step 2 Download the new ROMMON image from the TFTP server:

Console> (enable) copy tftp flash

Step 3 Program the new ROMMON image to the bootflash device on the Supervisor Engine 720 or the Supervisor Engine 720-10GE:

Console> (enable) rommon upgrade bootflash:c6ksup3-rm2.srec.8.5.1

Step 4 Check the new active ROMMON information:

Console> (enable) rommon show

Step 5 Reset the Supervisor Engine 720 or the Supervisor Engine 720-10GE:

Console> (enable) reset

Step 6 After the system comes up, check the ROMMON information again:

Console> enable

478
Views
0
Helpful
1
Replies
CreatePlease login to create content