Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Uploading configuration files to MGX8850

Hello all,

I need to upload customer configuration files to MGX8850. I am new to the WAN switching and I need a good link that help me upload the configuration files from a FTP or TFTP?

Also I need some a good link to IMA on the MGXs. Thank you very much for your help.

Mo

3 REPLIES

Re: Uploading configuration files to MGX8850

Hi,

Which firmware release are you using.

BR,

Mohammed Mahmoud.

New Member

Re: Uploading configuration files to MGX8850

Hello Mohammed,

The boot firmware revision for the PXM45B is 5.2(10.201)

Thx.

Mohamed

Re: Uploading configuration files to MGX8850

Hi Mohamed,

You'll find in this document everything related to AUSM and IMA:

http://www.cisco.com/univercd/cc/td/doc/product/wanbu/8850px45/rel52/ausm/index.htm

As for restoring the configuration for the whole MGX use the following steps (if you are talking about a single customer configuration you must do it manually or via CWM):

Restore the configuration file from the CWM (or the backup server) via tftp.

Use tftp put command on the CWM to the CNF folder of the MGX (ex: CNF/.zip)

start to restore the configurations using "restoreallcnf -f "

http://www.cisco.com/en/US/products/hw/switches/ps1938/products_configuration_guide_chapter09186a00800dff26_4container_ccmigration_09186a00801e88fa.html#1126325

You'll find all the relevant documents for MGX 8850 PXM45 in this url:

http://www.cisco.com/univercd/cc/td/doc/product/wanbu/8850px45/rel52/index.htm

HTH,

Mohammed Mahmoud.

136
Views
0
Helpful
3
Replies
CreatePlease to create content