urgent: problem with 876 router dialin: standard-route/gateway!!!!
unfortunately i do have a huge problem with a cisco 876 router:
it is configured via SDM utility but the dialin with my provider does not work!!
I have added 2 dns-servers manually as well as the connection details for my dsl -provider. The router seems to establish the connection because I receive a client IP-adress. But the router cannot connect to the dns-server (dns-ip is correct), because the route is not set somehow (looks like my exit interface (standard-route / standard-gateway) does not work properly or is unreachable.
I send you some screenshots as well as the error report and my running config as an attachment.
I didn't configure the router via CLI but via SDM-Utility. And in the menu screen forwarding next hop: interface I have also tried to switch to Dialer2 but that didn't help either.
the CD-light is glowing (not blinking) as well as the PPP-indicator light. So I guess the connection is established correctly. Besides I have received a Client-Ip-Adress from the Provider, so i think the router has negotiated correctly.
The problem seems to be that there is no exit-interface or this exit interface doesn't work correctly.
maybe you could check my running config in the attachment, if there is something wrong or some configuration mistakes??!!
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...