Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Use both WAN link parrarelly

Hi,

i got 2 cisco 2811 router. I have one leased line and one radio bandwidth both are of the 2 mbps. I want to use both of them pararelly to provide 4mbps throughput. More i'm using default route as internet access is done on

other side from this link.

Plz advice me which technology is better for me.

thks,

3 REPLIES

Re: Use both WAN link parrarelly

Hi

If you are connecting these links on both the routers then you can think off going for GLBP which will help to loadbalance in addition to redundancy between the links as well as on the hardware levels..

http://www.cisco.com/en/US/products/ps6350/products_configuration_guide_chapter09186a008042fb97.html

regds

New Member

Re: Use both WAN link parrarelly

Hi Sprem,

Actually is to use both link together to maximize the bandwitdh for the data transfer.

Any commands/technology can be used to do this?

thks,

rgds,

kenny

New Member

Re: Use both WAN link parrarelly

If they are both on the same router, you can get this done easily by using 2 default routes. Thes will load share the packets for you.

If on separate routers use GLBP

HTH

145
Views
0
Helpful
3
Replies
CreatePlease login to create content