04-17-2007 02:53 PM - edited 03-03-2019 04:35 PM
12.4XJ, tried
username test nopassword telnet 10.30.4.5 /source vlan2
it lets me login in without password but autocommand is not executed.
Has anyone seen this also ?
04-17-2007 04:05 PM
Hello,
please try this:
username test nopassword autocommand telnet 10.30.4.5 /source vlan2
Let me know
Regards
Andrea
04-17-2007 05:00 PM
Whoop's, that is what I have used. Mistyped copying the command above.
04-18-2007 07:49 AM
I need your specific release.
thanks
Andrea
04-18-2007 09:21 AM
12.4XJ as of today is only 12.4(11)XJ1 or XJ2.
Also tried with 12.4(11)T, same result.
Does it work for you ?
04-18-2007 09:59 AM
well,
I've you already tried with:
username test nopassword autocommand telnet 10.30.4.5
?
Regards
Andrea
04-18-2007 10:08 AM
Yes as it told you before ...
Without autocommand is command not valid!
Does it work for you ?
04-18-2007 10:17 AM
Paolo,
I quickly tested your setup in my lab and it works fine. I don't know if there's a 'additional blank space' or 'space missing' in your autocommand syntax. Try removing the config and reentering it.
username test nopassword
username test autocommand telnet 172.30.1.11 /source loopback123
!
!
!
!
R2#172.30.1.12
Trying 172.30.1.12 ... Open
User Access Verification
Username: test
Trying 172.30.1.11 ... Open
Password required, but none set
[Connection to 172.30.1.11 closed by foreign host]
[Connection to 172.30.1.12 closed by foreign host]
HTH
Sundar
04-18-2007 10:50 AM
Hi Sundar, thanks for trying. Which IOS on your test router ?
04-18-2007 10:58 AM
123-17a. It's a 2611.
HTH
Sundar
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: