Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Using PPPoFR as backup

I'm currently using the standard setup for a PPPoFR link:

interface Serial0/0

no ip address

encapsulation frame-relay IETF

no fair-queue

frame-relay traffic-shaping

frame-relay interface-dlci 50 ppp Virtual-Template1

class 1638

!

interface Virtual-Template1

bandwidth 6000

ip unnumbered Loopback0

ppp chap hostname xxx

ppp chap password yyy

This is currently working fine as the primary link, but I'd need to use this link as a backup using DDR.

Is there any way to use a Dialer interface rather than the Virtual-Template I'm currently using?

1 REPLY
Silver

Re: Using PPPoFR as backup

Hi,

you can use the 'backup interface' command without a DDR, if the encapsulation of your interfaces comes down during the fault. Anyway, a track solution (rtr or IP SLA) or something like 'auto-tunneling' with gre and static routes could do the trick.

Let me know

HTH

Andrea

133
Views
0
Helpful
1
Replies
CreatePlease login to create content