Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

using two bri links for load sharing

Hi,

I have one leased line backed by 2 bri links to remote branch.

Configured dialer interface and given dialer-load threshold 1.

When leased line is down, if i ping remote site i am getting !.!.!.!.!.

When one bri shutdown i am getting !!!!!!!!

Any suggestions for solving this problem.

Regards

skrao

2 REPLIES
Hall of Fame Super Gold

Re: using two bri links for load sharing

One would need to see configuration for both routers, and "debug ppp isdn q931" "debug ppp negotiation".

New Member

Re: using two bri links for load sharing

Hi,

Please post the router configurations.

give us the o/p of the following commands as well.

sh isdn status

have you configured PPP Multilink

ensure all BRI channels up and running.

Thanks and Regards,

Srinath.M

Cable&Wireless

95
Views
0
Helpful
2
Replies