Synchronous support with a maximum speed of 2.048 Mbps per port.
*Supports one port at 8 Mbps when used in NM-1FE1R2W, NM-1FE2W, NM-2FE2W, or NM-2W, or Cisco 2600 chassis WIC slots. All other WIC ports on that network module or Cisco 2600 chassis must not be used.
*Supports two ports at 4 Mbps each when used in NM-1FE1R2W, NM-1FE2W, NM-2FE2W, or NM-2W, or Cisco 2600 chassis WIC slots. All other WIC ports on that network module or Cisco 2600 chassis must not be used.
The line "Supports one port at 8 Mbps when used in Cisco 2600 chassis WIC slots." interested me most.
"All other WIC ports on that network module or Cisco 2600 chassis must not be used" encourages the earlier statement and confirms that it's without additional module which may save a big amount.
We've Cisco 2621XM and I'm using one WIC-1T only with it. By the way I've a 2801 also where I'm using one WIC-1T with it. All other slots are free in both of the routers.
Re: Using WIC-2T @8/8Mbps or @4/4Mbps with 2621XM/2801
The max speed supported by single port on WIC-2T card is 2Mbps(2048Kbps),i feel its the total aggregate which u can get with those ports and as per my understanding if u use 2 WIC-2T cards installed in any of these Network modules NM-1FE1R2W, NM-1FE2W, NM-2FE2W, or NM-2W you can bundle all the 4*2Mbps to have single 8Mbps logical link(resultant bandwidth),this is in addition to the extra fastethernet or token ring ports available with those modules.
Also with WIC-2T cards installed in those network modules you can bundle them as 2 different logical interface and get 2*4Mbps with them again along the additional ethernet or optional token ring interface..
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.