I have a site that uses a T1 for internet. They also have about 4 site to site vpn's using this link. I have an ASA in place doing NAT and the VPN's. I've got an 1841 in place terminating the DSL. I want to send all internet traffic to the new 1841 and still use the T1 just for vpn traffic. I've got PBR in effect to do this. Can I have a site that is connected via a fiber ring also utilize this? It's over a routed link so I don't see how to do that without changing a default route at my main site....but then all VPN traffic breaks.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...