Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

V.35 Interface

Hello,

I have a customer who wants 11 V.35 intrerfaces. Which router/s should I sell him.

Thanks.

6 REPLIES
Hall of Fame Super Gold

Re: V.35 Interface

Hi, with the introduction of the new hwic-4t

http://cisco.com/en/US/prod/collateral/modules/ps5949/ps6182/prod_qas0900aecd80274424.html

Even a 2801 would do. Then it depend by the circuit speed, if all ports are 2mbps, a bigger router would be recommended.

Hope this helps, please rate post if it does!

Re: V.35 Interface

Paolo,

I think the user wants to terminate 11 links rather than 11 Mbps in which i case the minimum router that would be required is a 2811 with one HWIC-4T and 4 x WIC-2T

I completely agree that a 38XX would be the preferred router for terminating 11 V35 interfaces

Narayan

Hall of Fame Super Gold

Re: V.35 Interface

Narayan, why 4 x wic-2t ? With 3 x HWIC-4T you have 12 ports so one is spare. And still one empty HWIC slot.

When it comes to choosing the router, as you know, "it depends". In many places, links are still low speed so even a small 28xx does well.

Re: V.35 Interface

You are right as always

I mistook HWIC-4T for a NM-4T :-)

Narayan

New Member

Re: V.35 Interface

Dear all,

Thank you very much.

Hall of Fame Super Gold

Re: V.35 Interface

You are welcome. As an appreciation to those that give useful answers, please rate posts with the scrollbox below!

377
Views
14
Helpful
6
Replies