i'm new with router and connectivity. In fact I need to know the differences between the interfaces V35 and G703 and when we can choose one or the other. A second question relates to the interfaces of the routers, if i want to cionfigure a 2Mbps interface, can I use a serial port with a V35 interface? Thank you
G.703 interface is either your regular RJ45 interface or a BNC interface.
Normally most 2 Mbps links come as G.703 interfaces unless otherwise requested. If you require to connect such a link to your router, you have 2 options:-
1) Since the link is presented in G.703 RJ45, you need a G.703 module in your router and then you can directly connect the link to your router.
2) If you have a non modular router, the serial interface is V.35, in which case you require a modem(Like RAD or Loopcom) to convert the G.703 to V.35 and then you can connect the Modem output to Serial port of the router.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...