We are starting to look at putting video over our AT&T MPLS Cloud. We have a 4.6 meg port with a 2.28meg cir. Our COS from AT&T is Ingress 60/40/0/0 and Egress 60/67/22/11. Attached is our current QOS Setting. There are only two classes set up now; Voice & everything else. I need to setup up 3; Voice, Video and everything else. The voice is a mixture of Cisco/Avaya PBX. Can anyone make some suggestions to what I should change the COS Settings to as well as a simple QOS design?
MPLS provides QoS using the three experimental bits in a label to determine the queue of packets. You statically set the experimental bits in both the VC label and the LSP tunnel label, because the LSP tunnel label might be removed at the penultimate router. Refer the following URL for more information
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.