Interface GigabitEthernet1/46- 1/48 are fiber points coming in off my Fiber equipment.
INT GIG1/1- 1/4 are going back to my Layer 3 Swtich. The fiber company wants me to give each customer its own VLAN - I know what to do for the Fiber ports (1/46-1/48 is just keep adding Addtional Vlans IE: switchport trunk allowed vlan 84,85), But I don't want to use any more then port 1-4 back to my Layer 3)
As you see I have 1 Vlan Assgined to each port back to my Switch.- How do I change that?
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...