09-07-2006 04:40 AM - edited 03-03-2019 01:54 PM
Hi
I want delete my Valan Configitarion i have several VLANs on my switches we are going to implement new plan nad for this i have to delete config........
for Example
I have Vlan 4
interface Vlan4
ip address 192.136.1.1
interface GigabitEthernet1/0/23
switchport access vlan 4
switchport mode access
switchport block multicast
switchport block unicast
no ip address
mdix auto
!
I want t delete all these at Once
Where ar my steps are
interface GigabitEthernet1/0/23
no switchport access vlan 4
than
Int vlan 4
no ip add
and at the end
no valn 4
all these are ok ???
after the performing above following steps Vlan 4 still exist in my runing config......
where as my Sw vtp statua is in server mode
VTP Version : 2
Configuration Revision : 5
Maximum VLANs supported locally : 1005
Number of existing VLANs : 8
VTP Operating Mode : Server
VTP Domain Name :
VTP Pruning Mode : Disabled
VTP V2 Mode : Disabled
VTP Traps Generation : Disabled
MD5 digest : 0x63 0xB9 0xEC 0x6B 0x48 0x40 0x0D 0x0F
Plz chk the following and suggest for the and quick solution
Thanks
09-07-2006 05:01 AM
Hi,
You have to go to the "vlan database" privilege exec command and delete the vlan.
Have a look at the following URL.
Hoep this helps. Rate the post if you find if usefull
-VJ
09-07-2006 06:34 AM
If you want to restore your factory default settings of your switch, just delete the vlan.dat file from flash. It contains all vlan information.
bye
FCS
Please rate me if I helped.
09-07-2006 06:35 AM
hi,
Try to remove the interface vlan4
using cmd
no interface vlan 4
Then you wont see it in running config
and also you can remove the vlan 4 by going to the vlan database
cmd
no vlan
TO completely remove vlan info
try to delete vlan.dat file
HTH
Thanks
Raj
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide