Hi all,
I need a bit of help getting a second vlan on my 878. I'm pretty sure it can be done, as we have another 878 with it working.
I can't add a vlan to the vlan database:
878-A#vlan 2
Vlan can not be added. Maximum number of 1 vlan(s) in the database.
878-A# sh vlans
No Virtual LANs configured.
878-A#sh run int vlan 2
!
interface Vlan2
description WAN OUTSIDE interface
ip address x.x.x.x 255.255.255.248
878-A#sh int vlan 2
Vlan2 is up, line protocol is down
Here's it working on another 878, even though it also shows no vlans:
878-B#sh vlans
No Virtual LANs configured.
878-B#sh int vlan2
interface Vlan2
description WAN OUTSIDE interface
ip address x.x.x.x 255.255.255.248
878-B#sh int fa3
interface FastEthernet3
switchport access vlan 2
duplex full
speed 100
878-B#sh int vlan 2
Vlan2 is up, line protocol is up
Here's their versions:
878-A#sh ver
Cisco IOS Software, C870 Software (C870-ADVSECURITYK9-M), Version 12.4(4)T7, RELEASE SOFTWARE (fc1)
878-B#sh ver
Cisco IOS Software, C870 Software (C870-ADVIPSERVICESK9-M), Version 12.4(4)T8, RELEASE SOFTWARE (fc3)
Any ideas??? I'm really desperate to get this working!
Many thanks,
J
