Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

VLAN problems on 878

Hi all,

I need a bit of help getting a second vlan on my 878. I'm pretty sure it can be done, as we have another 878 with it working.

I can't add a vlan to the vlan database:

878-A#vlan 2

Vlan can not be added. Maximum number of 1 vlan(s) in the database.

878-A# sh vlans

No Virtual LANs configured.

878-A#sh run int vlan 2

!

interface Vlan2

description WAN OUTSIDE interface

ip address x.x.x.x 255.255.255.248

878-A#sh int vlan 2

Vlan2 is up, line protocol is down

Here's it working on another 878, even though it also shows no vlans:

878-B#sh vlans

No Virtual LANs configured.

878-B#sh int vlan2

interface Vlan2

description WAN OUTSIDE interface

ip address x.x.x.x 255.255.255.248

878-B#sh int fa3

interface FastEthernet3

switchport access vlan 2

duplex full

speed 100

878-B#sh int vlan 2

Vlan2 is up, line protocol is up

Here's their versions:

878-A#sh ver

Cisco IOS Software, C870 Software (C870-ADVSECURITYK9-M), Version 12.4(4)T7, RELEASE SOFTWARE (fc1)

878-B#sh ver

Cisco IOS Software, C870 Software (C870-ADVIPSERVICESK9-M), Version 12.4(4)T8, RELEASE SOFTWARE (fc3)

Any ideas??? I'm really desperate to get this working!

Many thanks,

J

1 REPLY
Hall of Fame Super Gold

Re: VLAN problems on 878

Hi, you need advanced ip service for VLAn on the 870 series, you router B has it hence it works.

Hope this helps, please rate post if it does!

466
Views
0
Helpful
1
Replies
CreatePlease login to create content