Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

vlans help

Hi,

We have 3500 switch in that i have to configure vlans like 10.10.10.10-vlan1,20.20.20.20-vlan-2,30.30.30.30-vlan-3 and iwant all the vlans should be communicated by defalut vlan and i shouls give priority for this vlans like vlan-1 should communicate vlan-3 not for vlan2

plz give me some examples.

srinivas

3 REPLIES
Hall of Fame Super Silver

Re: vlans help

Hello Srinivas,

inter-Vlan routing example if you have a C3550 device (not possible with a C3524XL or similar that are only OSI Layer2)

ip routing

vlan database

vlan 2

name vlan2

vlan 3

name vlan3

apply

exit

int vlan1

ip address 10.10.10.1 255.255.255.0

no sh

int vlan2

ip address 10.20.20.1 255.255.255.0

no sh

int vlan3

ip address 10.30.30.1 255.255.255.0

no sh

if it is a L2 only device you need a L2 trunk link to an external device

Hope to help

Giuseppe

New Member

Re: vlans help

Hi sir,

Thanks for ur reply and remote we have dlink l2 switch 3526 how can i made trunk on l2 switch

for this any document is there

Thanks for reply

srinivas

New Member

Re: vlans help

Is the D-Link managed?

185
Views
0
Helpful
3
Replies