Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

VPLS

hi ,

is 7206VXR with NPE-2G support VPLS.and what else supported by as MPLS layer 2 VPN.

7 REPLIES
Cisco Employee

Re: VPLS

Ahmed,

The 7206 does not support VPLS (l2 vpn point to multipoint). The 7600, GSR and CRS do. The 7206 does support L2 VPN in a point to point configuration (AToM) though.

Regards

Harold Ritter
Sr. Technical Leader
CCIE 4168 (R&S, SP)
harold@cisco.com
México móvil: +52 1 55 8312 4915
Cisco México 
Paseo de la Reforma 222 Piso 19
Cuauhtémoc, Juárez
Ciudad de México, 06600
México
New Member

Re: VPLS

there is no plan to support VPLS on 7206VXR,

another questioN, do you recommend to use VPLS in the wan links.

New Member

Re: VPLS

Hi,

the 7206 does not support VPLS , and the 7606 can support VPLS ,can the 7206 work with 7606 in VPLS , what i mean is the 7606 from the site of multipoint and 7206 from the site of point to multipoint

Hall of Fame Super Silver

Re: VPLS

Hello Ahmed,

you can configure a point-to-point EoMPLS from c7206 to the C7606 where EoMPLS and VPLS should be able to coexist on the same chassis.

see

http://www.cisco.com/en/US/docs/net_mgmt/ip_solution_center/5.0/metro_ethernet/user/guide/concepts.html

http://www.cisco.com/en/US/docs/ios/mpls/configuration/guide/mp_l2vpn_pseudo_swit_ps6922_TSD_Products_Configuration_Guide_Chapter.html#wp1054008

But the EoMPLS on the C7206 side needs a similar counterpart on the C7606 to setup the pseudowire.

It is not as simple as FR point-to-point to FR p-to-multipoint here different signalling methods are involved.

Hope to help

Giuseppe

Cisco Employee

Re: VPLS

Giuseppe,

Just to add to your comment, you could also have EoMPLS configured on the 7206s and VPLS configured on the 7606 to create a point to multipoint between all the 7206s. This will work too.

Regards

Harold Ritter
Sr. Technical Leader
CCIE 4168 (R&S, SP)
harold@cisco.com
México móvil: +52 1 55 8312 4915
Cisco México 
Paseo de la Reforma 222 Piso 19
Cuauhtémoc, Juárez
Ciudad de México, 06600
México
Hall of Fame Super Silver

Re: VPLS

Hello Harold,

thanks for your feedback I thought it could be a problem to have point-to-point EoMPLS and VPLS on the other side.

Best Regards

Giuseppe

Cisco Employee

Re: VPLS

Ahmed,

If you mean point to point (EoMPLS) on the 7206s and point to multipoint (VPLS) on the 7606 then the answer is yes it will work. Bear in mind that the 7606 needs either a ES20 or a SIP card for VPLS to work.

Regards

Harold Ritter
Sr. Technical Leader
CCIE 4168 (R&S, SP)
harold@cisco.com
México móvil: +52 1 55 8312 4915
Cisco México 
Paseo de la Reforma 222 Piso 19
Cuauhtémoc, Juárez
Ciudad de México, 06600
México
555
Views
5
Helpful
7
Replies
CreatePlease login to create content