I just can't get to understand this. I'm based at a client site and I have the 877 ADSL Router configured. Router is configured to access the client's network as well as Internet. It also has a config to access my Office via VPN. Access to client and Internet works fine. Access to my office doesn't.
Being new to the world of NAT and VPN is someone kind enough to assist me with
1. A basic config template to configure VPN connections.
2. How to check if the VPN to other site is UP/down?
3. What I need to do get it working.
The device that allows the VPN access at the office is a cisco router which has been configured to allow the access in.
What configs do you require? Where do I begin? I'm starting to feel really depressed about this. Any help would be great!
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...