I'm trying to connect from a router with ezvpn remote configured to an ASA. I get the following error on the ASA. I can connect using the same group and password from the software VPN client.
Received an un-encrypted NO_PROPOSAL_CHOSEN notify message, dropping
Information Exchange processing failed
The router reports that none of the proposals are accepted. I can't pass Phase 1, but I'm not sure why. The ASA is running 8.04 (upgraded last night for this purpose), and the remote router is on 12.4(15)T7. I've deleted the config completely on the router side and still doesn't work. I can change my config to connect to my personal ASA and it works fine, so I tend to think it's something in the 5520 that's causing a problem, but I can't figure out what it is. Being that I can connect to the same group that I'm using in the ezvpn client, I'm led to believe that the tunnel groups and group policy is configured correctly (at least for the software piece of it).
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...