07-07-2014 10:39 AM - edited 03-04-2019 11:18 PM
All
We have a VPN users connecting to our ASA 5520 they come in on the following IP address 192.168.212.0/24 they then can access the internet via the company LAN and then out to Proof point all good. we have a new application that can only permits logon from only the firewalls outside address
The question is how do I accomplish this? We are running code 8.2.48
Thanks In Advance
Nigel
07-07-2014 03:35 PM
Nigel
Perhaps you can tell us a bit more about this application and why it would permit logon from the firewall outside address. If we understood the environment better we might be able to suggest a solution. But right now I am not able to suggest how VPN users would logon using the firewall outside interface address.
HTH
Rick
07-08-2014 03:35 AM
Hi Rick
The application is salesforce.com and they will only accept traffic from the outside interface of the firewalls in two locations we have. They come in on to the VPN on a class c subnet 192.168.212.0/24
I have had a suggestion of hair pinning on the firewall
Any suggestions welcome
Thanks
Nigel
07-21-2014 01:38 AM
All
Thanks for the replies this has now been fixed by ASA hair pinning
Thanks
nigel
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide