Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

VPN tunnel disconnect when new tunnel is added

users complain they are unable to telnet to desired devices in the private network when I add a new ipsec vpn tunnel. CSCdz46552 seems to address my issue. I'm currently running 1700-k9o3sy7-mz.122-8.t10 on a 1721 router w/8/32mg of mem. Any suggestions on the IOS to upgrade to ???? Thank You.

1 REPLY
Hall of Fame Super Silver

Re: VPN tunnel disconnect when new tunnel is added

Jim

I was looking recently and I was not able to find a crypto image for the 1721 that would run in 8/32 of memory. Part of the issue is that most of the 12.2T images are no longer available from CCO (they have been removed). Without a memory upgrade or a different platform I am not sure that there is an option to solve your problem.

If you do find a solution I hope that you will post it back to the forum.

HTH

Rick

266
Views
5
Helpful
1
Replies