06-12-2006 12:17 PM - edited 03-03-2019 12:58 PM
Hello:
I believe that VPN tunnels can be configured over a Multilink PPP but I just want to get verification that I am right. We currently run VPN tunnels to connect each one of our locations together. We will be upgrading to bonded 3Mb circuit in a couple of weeks. When I turn up the circuit will that affect my current VPN tunnels to and from that sight??
Solved! Go to Solution.
06-12-2006 12:33 PM
Should not be an issue for you. We have two T1s in a multi-link and are running several GRE tunnels without issue. Hope this helps.
06-12-2006 12:33 PM
Should not be an issue for you. We have two T1s in a multi-link and are running several GRE tunnels without issue. Hope this helps.
06-12-2006 12:57 PM
Thanks Sean. That certainly helped. I thought that it should be fine but since I have never worked such an environment, just wanted to make sure.
06-12-2006 12:58 PM
i dont think so it will affect...for tunnel both the end must be rechable and if you configure the authentication or other parameter must be match...so i think i will work properly...
regards
Devang
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide