For some reason if I setup a vrf receive route for incoming connected connections the router will see them but will not redistribue the connected routes.
If I do a "show ip route vrf customer1 connected" it shows all of the routes fine.
If I setup a static route then this redistributes fine to other routers and if I setup a vrf forwarding route this will also redistribute fine.
It's only vrf receive connected routes which do not seem to redistribute. I've checked the Cisco bug search tool but cannot see this particular issue but I've gone through everything and I cannot see why they will not redistribute.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...