Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

VSS

Hi ALL:

Could anyone provide me any good link on how to configure and use VSS.

Chao

Vishwa

1 REPLY
Hall of Fame Super Silver

Re: VSS

Hello Vishwa,

http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SX/configuration/guide/vss.html

only 67xx modules can be used and these modules don't support POE.

The virtual switching system requires 67xx series switching modules.

The virtual switching system does not support classic, CEF256 or dCEF256 switching modules. In virtual switch mode, unsupported switching modules remain powered off.

The two supervisor engines must match exactly

The VSS is targeted for data center.

the new release 12.2SXI should support service modules and MPLS.

first release in 12.2SXH didn't support IPv6 and MPLS and most of service modules.

Hope to help

Giuseppe

214
Views
3
Helpful
1
Replies
CreatePlease to create content