Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

VTP version is not the same on server and client

Hi

I have a VTP server on Cisco 3750 with this configuration:

#sh vtp status

VTP version : 2

Configuration Revision : 31

..

VTP V2 Mode : Disabled

I connect a 2960 on this VTp server and i get:

#sh vtp status
VTP Version                     : running VTP1 (VTP2 capable)
Configuration Revision          : 31
Maximum VLANs supported locally : 255
Number of existing VLANs        : 20
VTP Operating Mode              : Client
VTP Domain Name                 : DOMAINE
VTP Pruning Mode                : Enabled
VTP V2 Mode                     : Disabled
VTP Traps Generation            : Disabled

On the othe client VTP client I have a VTP Version = 2.

But on my new 2960, i receive all of Vlan...

Is there any probleme?

Thanks for your help.

Nicolas

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: VTP version is not the same on server and client

Hi Nicolas,

#sh vtp status

VTP Version                     : running VTP1 (VTP2 capable)
Configuration Revision          : 31
Maximum VLANs supported locally : 255
Number of existing VLANs        : 20
VTP Operating Mode              : Client
VTP Domain Name                 : DOMAINE
VTP Pruning Mode                : Enabled
VTP V2 Mode                     : Disabled
VTP Traps Generation            : Disabled


You need to check the highlight field to find what VTP version is running. The top VTP version just tell you this switch is able to do VTP v2 or not.

HTH,

Lei Tian

2 REPLIES
Cisco Employee

Re: VTP version is not the same on server and client

Hi Nicolas,

#sh vtp status

VTP Version                     : running VTP1 (VTP2 capable)
Configuration Revision          : 31
Maximum VLANs supported locally : 255
Number of existing VLANs        : 20
VTP Operating Mode              : Client
VTP Domain Name                 : DOMAINE
VTP Pruning Mode                : Enabled
VTP V2 Mode                     : Disabled
VTP Traps Generation            : Disabled


You need to check the highlight field to find what VTP version is running. The top VTP version just tell you this switch is able to do VTP v2 or not.

HTH,

Lei Tian

New Member

Re: VTP version is not the same on server and client

Okay on server and client i have "VTP V2 Mode : Disable"

Thanks you!!

639
Views
0
Helpful
2
Replies
CreatePlease to create content