Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

Bronze

VTP

As per my understanding ,VTP configuration is done by two method 1) previlage mode 2) configration mode,

1) which is one better one and why?

2) what is differance between VTP version 1 and version 2

2 REPLIES
Silver

Re: VTP

Answer for questions:

1) There is no differenece between the two methods, one of them are not supported in the newer IOS (vlan database is not supported in new IOSs)

2)Version two support the following options:

-version-dependent transparent mode:

forward VTP messages without checking, since only one VTP domain is supported at same time, in version 1, domain name and version is checked before it is sent to the next device

-Token Ring support

-consistency check

check the VTP and VLAN parameters, that has been entered from CLI (command) or SNMP. No consitency check for messages that are come from trunk.

-unrecognized Type-Length-Value support

forwards VTP messages that the equipment can't process

Shortly these are the differences....

bye

FCS

Please rate me if I helped.

Re: VTP

hi,

you can configure by any method thas not big issue...

but your second que. need some idea of VTP and behaviour of the different VTP version...

take a look at this link and read it, it will really help you: http://www.cisco.com/en/US/tech/tk389/tk689/technologies_tech_note09186a0080094c52.shtml

hope this will help you.

rate this post if it helps

regards

Devang

90
Views
0
Helpful
2
Replies