Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
Bronze

VWIC 2MFT ? G703

Hi,

Does this card supports ISDN PRI? I.e. i need to connect multiple remote sites to this card, in other words to be aggregation ISDN PRI for remote BRI sites?

As i read at a Cisco document for Cisco 3600 "If you set up the card to use ISDN PRI signaling, there is no support for ISDN data connection. The card cannot terminate ISDN 64K or 56K data connection; the card only supports voice-call termination with ISDN PRI signaling.", i think this valid when it is installed at Cisco 2851?

Thanks in advance

Abd Alqader

3 REPLIES
Silver

Re: VWIC 2MFT ? G703

According to below product info., it does not mention to support ISDN.

http://www.cisco.com/en/US/products/hw/routers/ps259/products_data_sheet09186a0080091b9c.html

The function is limited on the module and not the router model. So I believe this module still not able to support ISDN in 2851. However, you can implement fractional T1/E1 instead of PRI if the PTT supports it.

Hope this helps.

Bronze

Re: VWIC 2MFT ? G703

Hi Jack,

Yes, it seems that.

But what about fractional T1/E1 instead of PRI if the PTT supports it?

Thanks in advance

Abd Alqader

Silver

Re: VWIC 2MFT ? G703

Please check the provided link that it mentioned to support fractional T1/E1, so I suggest to check w/ PTT for this service availability.

99
Views
0
Helpful
3
Replies
CreatePlease to create content