Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

VWIC2-1MFT-T1/E1 on 1721

Hi,

I've a problem with this daugter card on a router Cisco 1721. In fact the router doesn't recognize this card.

******* Sh ver ********

Cisco Internetwork Operating System Software

IOS (tm) C1700 Software (C1700-K9O3SY7-M), Version 12.3(26), RELEASE SOFTWARE (fc2)

*******sh diag ********

Slot 0:

C1721 1FE Mainboard Port adapter, 2 ports

Port adapter is analyzed

Port adapter insertion time unknown

EEPROM contents at hardware discovery:

Hardware Revision : 4.0

PCB Serial Number : FOC08383JC5

Part Number : 73-7546-04

Board Revision : A0

Fab Version : 04

Product (FRU) Number : CISCO1721

EEPROM format version 4

EEPROM contents (hex):

0x00: 04 FF 40 03 5A 41 04 00 C1 8B 46 4F 43 30 38 33

0x10: 38 33 4A 43 35 82 49 1D 7A 04 42 41 30 02 04 FF

0x20: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0x30: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

WIC/VIC Slot 0:

Unknown

Daughter card-Version 4 TLV Cookie Format

Hardware Revision : 0.0

Top Assy. Part Number : 800-22628-05

Board Revision : B0

Deviation Number : 94603

Fab Version : 04

PCB Serial Number : FOC1216165M

RMA Test History : 00

RMA Number : 0-0-0-0

RMA History : 00

Product (FRU) Number : VWIC2-1MFT-T1/E1

Version Identifier (VID) : V01

WIC/VIC Slot 1:

Serial 1T

Hardware revision 1.0 Board revision J0

Serial number 0023147339 Part number 800-01514-01

FRU Part Number WIC-1T=

Test history 0x00 RMA number 00-00-00

Connector type WAN Module

EEPROM format version 1

EEPROM contents (hex):

0x20: 01 02 01 00 01 61 33 4B 50 05 EA 01 00 00 00 00

0x30: 98 00 00 00 11 11 02 01 FF FF FF FF FF FF FF FF

**********************************

I don't understand this problem.

Please, someone can help me?

Thanks in advance.

Regards.

2 ACCEPTED SOLUTIONS

Accepted Solutions
New Member

Re: VWIC2-1MFT-T1/E1 on 1721

here is your file . again, do not delete the old one t'l this one is confirmed working .,, good luck and bon chance VZ

IP BASE

c1700-ipbasek9-mz.124-23.bin

Release Date: 12/Nov/2008

IP BASE

Size: 11603.01 KB (11881480 bytes)

Minimum Memory: DRAM:64 MB Flash:16 MB

Hall of Fame Super Silver

Re: VWIC2-1MFT-T1/E1 on 1721

Hello Marc,

the minimum version is 12.3(14)T you had a 12.3(26) mainline.

T is for technology train.

New features and new cards are introduced in the T train and then later integrated in main release.

You can find in 12.4 mainline the support of what has been introduced in 12.3T

Bonnes Fetes a Tous

Hope to help

Giuseppe

6 REPLIES
Hall of Fame Super Silver

Re: VWIC2-1MFT-T1/E1 on 1721

Hello Marc,

in the following link the compatibility matrix

http://www.cisco.com/en/US/products/hw/routers/ps214/products_tech_note09186a00800ae37f.shtml

notice that the following is supported

VWIC-2MFT-E1

but yours is VWIC2-1MFT-T1/E1

the following

http://www.cisco.com/en/US/prod/collateral/routers/ps5855/product_data_sheet0900aecd8028d2db.html

declares support on C1721 for data services only

it is an IOS problem see table 1

minimum IOS for 1721 to support the VWIC2

12.3(14)T

So you need to perform an IOS upgrade to support the module

Hope to help

Giuseppe

New Member

Re: VWIC2-1MFT-T1/E1 on 1721

Marc, giuslar is right,,, I have 3745 router w/ VWIC2-MFT-T1/E1 that was not been reconize due to iso .. here is the one lastest one for my 3745..ipbase ios ..

c3745-ipbasek9-mz.124-23.bin

One more thing your are in france so you may be using E1. I do not know if europe config and language are the same as USA.. bone chance mon ami :-)

New Member

Re: VWIC2-1MFT-T1/E1 on 1721

here is your file . again, do not delete the old one t'l this one is confirmed working .,, good luck and bon chance VZ

IP BASE

c1700-ipbasek9-mz.124-23.bin

Release Date: 12/Nov/2008

IP BASE

Size: 11603.01 KB (11881480 bytes)

Minimum Memory: DRAM:64 MB Flash:16 MB

New Member

Re: VWIC2-1MFT-T1/E1 on 1721

Many thanks guys. Your replies were very helpfull for me to solve my issue.

In fact, I was missed with the vesrsion of the card I search on Cisco website (VWIC-2MFT-E1

instead of VWIC2-1MFT-T1/E1). Now I put the IOS c1700-ipbasek9-mz.124-23.bin and the card works fine !!!!!! Hourreyyyyyy !!!!

Just something I don't understand : onto the matrix compatibility, it is indicated that I need a IOS 12.3(14)T or earlier. My router was using a 12.3(26) Version and it didn't work? Could you please explain me that fact?

Thanks again. and as we said in France "BONNES FETES A TOUS"

Hall of Fame Super Silver

Re: VWIC2-1MFT-T1/E1 on 1721

Hello Marc,

the minimum version is 12.3(14)T you had a 12.3(26) mainline.

T is for technology train.

New features and new cards are introduced in the T train and then later integrated in main release.

You can find in 12.4 mainline the support of what has been introduced in 12.3T

Bonnes Fetes a Tous

Hope to help

Giuseppe

New Member

Re: VWIC2-1MFT-T1/E1 on 1721

Many thanks for these explanations Giuseppe.

Kind regards.

Marc

465
Views
0
Helpful
6
Replies