Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

VXR 7206 / PA-2T3

I am trying to figure out if I can can channelize 1 DS3 port of a PA-2T3 and have the other port non-channelized, which is interfaces 6/0 and 6/1 (S6/0 is the one I wanted to channelize)

GOMPLS(config)#controller T3 ?

<5-5> Controller slot number

I have another DS3 card and it is the only controller that I have an option for. Any help would be much appreciated!

GOMPLS# sho ver

Cisco Internetwork Operating System Software

IOS (tm) 7200 Software (C7200-IK9S-M), Version 12.2(15)T17, RELEASE SOFTWARE (fc

1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2005 by cisco Systems, Inc.

Compiled Sat 13-Aug-05 08:20 by kehsiao

Image text-base: 0x60008954, data-base: 0x61DF4000

ROM: System Bootstrap, Version 12.0(19990210:195103) [12.0XE 105], DEVELOPMENT S

OFTWARE

BOOTLDR: 7200 Software (C7200-BOOT-M), Version 12.0(5)T1, RELEASE SOFTWARE (fc1

)

GOMPLS uptime is 17 weeks, 6 days, 18 hours, 11 minutes

System returned to ROM by power-on

System restarted at 16:15:17 DST Wed Jul 2 2008

Running default software

cisco 7206VXR (NPE300) processor (revision B) with 229376K/65536K bytes of memor

y.

Processor board ID 16063557

R7000 CPU at 262Mhz, Implementation 39, Rev 1.0, 256KB L2, 2048KB L3 Cache

6 slot VXR midplane, Version 2.0

Last reset from power-on

Bridging software.

X.25 software, Version 3.0.0.

Primary Rate ISDN software, Version 1.1.

1 FastEthernet/IEEE 802.3 interface(s)

2 Serial network interface(s)

1 Channelized T3 port(s)

125K bytes of non-volatile configuration memory.

46976K bytes of ATA PCMCIA card at slot 0 (Sector size 512 bytes).

4096K bytes of Flash internal SIMM (Sector size 256K).

Configuration register is 0x2102

GOMPLS#sho run

interface Serial6/0

no ip address

no ip route-cache

no ip mroute-cache

shutdown

dsu bandwidth 44210

framing c-bit

cablelength 10

serial restart_delay 0

!

interface Serial6/1

ip address 172.x.x.x 255.255.255.252

ip nat inside

ip route-cache flow

no ip route-cache cef

no ip mroute-cache

dsu bandwidth 12288

framing c-bit

cablelength 10

serial restart_delay 0

GOMPLS#sho diag

Slot 5:

CT3 single wide Port adapter, 1 port

Port adapter is analyzed

Port adapter insertion time 17w6d ago

EEPROM contents at hardware discovery:

Hardware revision 1.0 Board revision A0

Serial number 21192556 Part number 73-3037-01

FRU Part Number: PA-MC-T3= (SW)

Test history 0x0 RMA number 00-00-00

EEPROM format version 1

EEPROM contents (hex):

0x20: 01 A0 01 00 01 43 5F 6C 49 0B DD 01 00 00 00 00

0x30: 50 00 00 00 00 07 06 00 FF FF FF FF FF FF FF FF

Slot 6:

T3 PA Port adapter, 2 ports

Port adapter is analyzed

Port adapter insertion time 17w6d ago

EEPROM contents at hardware discovery:

Hardware revision 1.0 Board revision A0

Serial number 10738546 Part number 73-2323-02

FRU Part Number: PA-2T3=

Test history 0x0 RMA number 00-00-00

EEPROM format version 1

EEPROM contents (hex):

0x20: 01 53 01 00 00 A3 DB 72 49 09 13 02 00 00 00 00

0x30: 50 00 00 00 98 11 06 00 FF FF FF FF FF FF FF FF

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: VXR 7206 / PA-2T3

Mark,

Unlike the PA-MC-T3, the PA-2T3 doesn't support Channelized T3.

Regards

Harold Ritter
Sr. Technical Leader
CCIE 4168 (R&S, SP)
harold@cisco.com
México móvil: +52 1 55 8312 4915
Cisco México
Paseo de la Reforma 222
Piso 19
Cuauhtémoc, Juárez
Ciudad de México, 06600
México
2 REPLIES
Cisco Employee

Re: VXR 7206 / PA-2T3

Mark,

Unlike the PA-MC-T3, the PA-2T3 doesn't support Channelized T3.

Regards

Harold Ritter
Sr. Technical Leader
CCIE 4168 (R&S, SP)
harold@cisco.com
México móvil: +52 1 55 8312 4915
Cisco México
Paseo de la Reforma 222
Piso 19
Cuauhtémoc, Juárez
Ciudad de México, 06600
México
Community Member

Re: VXR 7206 / PA-2T3

Thanks hritter!

That's what I thought but could not find anything definitive on Cisco's website.

305
Views
0
Helpful
2
Replies
CreatePlease to create content