in a situation where you have two links: one clear channel e1 and a backup 128k link on your edge router which of it will you set as bandwidth and what happens when the primary link fails will you need to adjust the config on the wae?
Cisco WAAS can be deployed using WCCPV2 as the traffic redirection method. WCCPv2 enables transparent off-path deployment of Cisco WAEs, providing high availability and load balancing. WCCPv2 is a protocol that allows devices such as the Cisco WAE to join service groups with network devices (such as routers or switches) for the purpose of injecting itself into the flow of application traffic to optimize or otherwise manipulate flows. When configured properly, the WCCPv2 process on the network device examines traffic to identify flows related to applications that match the criteria defined in the configured service groups
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...