i´m wondering if there is any solution for this problem: we plan to use dynamic vlan assignment and have wake on lan already in place. if using dynamic vlan assignment the port falls back to the default vlan, and than the magic packet doesn´t work any more.
does anybody have a solution for that beside the possibility to send the magic packet also into the default-vlan??
somebody told me thta the "energywise feature" would help but i couldn´t find a possibility.
from a theoreticl point of view i´m searching something like that: the switch recognizes during the day which domain-clients are connected on which ports (based on the domain-name known through 802.1x). if a mgaic packet comes to the switch with a speical domain, ip-subnet or whatever it is broadcasted out all these ports where such clients have been seen....
I do not know of any way to have the swtich remember previous assignments and forward WoL based on the previous assignment. But I do not see why it would not work if you forward the WoL packet to the default vlan.
thanks for the answer. but it´s not a technical problem, it´s an organisational one: first we have to change a lot in the currently used wake on lan server which have been developed by our windows-department themselves. moreover we have about 2000 branches which are separated by Layer-3. every laptop can be everywhere and that means that we have to send every magic packet nto 2000 L3-subnets...
Thanks for the additional explanation. Yes that does make it challenging when there is that much distributed network. From a technical perspective the WoL could be sent to all layer 3 subnets but that would impose quite a burden. So now the answer needs to be organizational and not technical.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.