I've a ADSL connection which is running through a ADSL mode provided by Service provider...but now we want to replace it with a Cisco 2821 ISR router. This is for a corporate office. Is there someone who can help me in configuring this router...? Thanks in advance.
Thanks for your prompt response. I got it configured myself and I had all the resources in hand but it was not getting established to ISP network until y'day. That's why I asked for help on configuration example with that i can compare with. Anyhow now it's done and we can close this chain...
If someone require a sample config. do let me know.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...