I have just had T1 installed and paradynes are the CSU/DSU from ISP. Upon connecting V35 - serial DTE cables and configuring Frame Relay Or PPP i get one router coming up with serial up / line protocol (down). But with one of teh routers it says Serial up / line protocol down (looped).
What do you think is the problem and how can i get is solved. I called ISP and they checked their connections and it is not looped on their end.
If you have control of the Paradyne CSU/DSU then verify that their are no loops on any of the V>35 DTE ports or the T-1 itself. Also verify that the DS0's are mapped correctly to your respected V.35 ports. My guess is that the carrier did not configure the Paradyne CSU correctly.....
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...