08-05-2009 12:18 AM - edited 03-04-2019 05:39 AM
1. the customer has two wan links
need:
when the traffic on link no.1 reach thershold level the traffic must go by link no.2
if it possible how can i make this configuration
08-05-2009 01:54 AM
Hi Wael,
This is possible to do using Optimized Edge Routing (its new name is Performance Routing).
Here is the link to the configuration guide:
http://www.cisco.com/en/US/docs/ios/oer/configuration/guide/12_4t/oer_12_4t_book.html
Cheers:
Istvan
08-05-2009 03:58 AM
thanks for your help but This solution need 2 routers at least one is OER master and other is OER border and i have only one router is it possible to apply oer on this router
08-05-2009 04:07 AM
Yes, it is possible to run the Master Controller and the PfR Border Router on the same router.
Istvan
08-10-2009 01:06 AM
thank you very much for your generous help
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: