I have one firewall ASA5510, and I configured NAT from inside IP to Ouside IP on ASA5510, and I want to access that Outside Ip from Inside,Please Help me, I am trying from last 1-week but still I am unable to do that.
If you don't have one already, and you need this to work from a bunch of machines inside, set up a DNS server for the inside network with the correct inside NAT address for the internal resources (in addition to caching the external references).
If this is just for your machine, then edit the hosts file with the internal address mapped to the external dns name.
The hosts file is under SYSTEM32\ETC\DRIVERS (which starts under the directory name of either WINDOWS or WINNT)
There are examples in the hosts.sam file, ust edit your hosts in following that format and save it as "hosts" (no .sam extension).
Windows searches that file for address resolution before sending a DNS request (for *nix, it uses /etc/hosts).
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...