Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Want to add VPN traffic to new Outgoing DSL line

I have a new ASA 5510 that is currently working fine. I just added a DSL line to be used for incoming VPN connections only.

What do I need to do to get that working? I have turned off all security on the DSL modem and tested it by attaching a laptop to the modem- hard-coding a routable IP (I turned off the modem's DHCP) and was able to ping the laptop w/o an issue. When I plug the modem into the ASA 5510, hard code a routable IP, ping the IP on the ASA I get 'Request timed out.'

What routing do I need to setup on the ASA to get the traffic to pass through?


-Mike Johnson


Re: Want to add VPN traffic to new Outgoing DSL line

Hi Mike

Can you revert back from where you are trying to ping the ip assigned on the ASA ?

Also did u do a reverse trace for the ip assigned on your ASA ? That will definitely help you out in identifying where its getting blocked..


CreatePlease to create content