Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

wccp and gre on 4500

On which IOS version for the 4500 series is WCCP with GRE possible?

We have sup IV and sup 6-E.

4 REPLIES
Bronze

Re: wccp and gre on 4500

Taking these three points together, the following configuration is required if you want WCCP interception to be handled completely in hardware on the 4500/Sup720 or 6-E.

- GRE or L2 forwarding

- Mask assignment

- Inbound redirection

- No 'ip wccp redirect exclude in'

This will require you to reverse the logic of how your service groups are applied:

- 'ip wccp web-cache redirect in' on client-facing interfaces

- 'ip wccp 95 redirect in' on internet-facing interfaces

Cisco Employee

Re: wccp and gre on 4500

Hi, The only WCCP feature supported on C4500 is WCCP version 2 Layer 2 Redirection.

You can find the information from C4500 IOS software release note:

http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/release/note/OL_5184.html#wp757989

HTH,

jerry

New Member

Re: wccp and gre on 4500

Hello,

I'm curious if you know the answer to this question.

I'm currently testing the transparent redirection of network traffic using wccp on a 4507 with Sup-IV and a BlueCoat Proxy SG.

I'm getting the following from the debugs and show commands. Any idea what the problem is? I have L2 forwarding enbaled on the BlueCoat. Time for me to open a case with TAC?

4507-1#debug ip wccp events

4507-1#debug ip wccp packets

Oct 28 14:54:11.404: WCCP-EVNT:wccp_copy_wc_assignment_data: enter

Oct 28 14:54:11.404: WCCP-EVNT:wccp_copy_wc_assignment_data: allocate orig hash info (40 bytes)

Oct 28 14:54:11.404: WCCP-EVNT:wccp_copy_wc_assignment_data: exit

Oct 28 14:54:11.404: WCCP-PKT:D01: Sending I_See_You packet to 10.1.4.23 w/ rcv_id 00000001

SPNC-4507-2#

Oct 28 14:54:21.403: WCCP-EVNT:wccp_copy_wc_assignment_data: enter

Oct 28 14:54:21.403: WCCP-EVNT:wccp_copy_wc_assignment_data: allocate orig hash info (40 bytes)

Oct 28 14:54:21.403: WCCP-EVNT:wccp_copy_wc_assignment_data: exit

Oct 28 14:54:21.403: WCCP-PKT:D01: Sending I_See_You packet to 10.1.4.22 w/ rcv_id 00000002

Oct 28 14:54:21.403: WCCP-EVNT:wccp_update_assignment_status: enter

Oct 28 14:54:21.403: WCCP-EVNT:wccp_update_assignment_status: exit

Oct 28 14:54:21.403: WCCP-EVNT:D01: Here_I_Am packet from 10.1.4.23 w/bad assign method 00000001, was offered 00000002

Oct 28 14:54:21.403: WCCP-EVNT:D01: Here_I_Am packet from 10.1.4.23 with incompatible capabilites

SPNC-4507-2#

Oct 28 14:54:21.403: WCCP-PKT:D01: Sending I_See_You packet to 10.1.4.23 w/ rcv_id 00000003

SPNC-4507-2#

Oct 28 14:54:31.403: WCCP-EVNT:D01: Here_I_Am packet from 10.1.4.22 w/bad rcv_id 00000003

Oct 28 14:54:31.403: WCCP-PKT:D01: Sending I_See_You packet to 10.1.4.22 w/ rcv_id 00000004

Oct 28 14:54:31.403: WCCP-EVNT:wccp_update_assignment_status: enter

Oct 28 14:54:31.403: WCCP-EVNT:wccp_update_assignment_status: exit

Oct 28 14:54:31.403: WCCP-EVNT:D01: Here_I_Am packet from 10.1.4.23 w/bad assign method 00000001, was offered 00000002

Oct 28 14:54:31.403: WCCP-EVNT:D01: Here_I_Am packet from 10.1.4.23 with incompatible capabilites

Oct 28 14:54:31.403: WCCP-PKT:D01: Sending I_See_You packet to 10.1.4.23 w/ rcv_id 00000005

4507-1#sh ip wccp 1 detail

WCCP Client information:

WCCP Client ID: 10.1.4.23

Protocol Version: 2.0

State: NOT Usable

Redirection: L2

Packet Return: L2

Packets Redirected: 0

Connect Time: 00:05:09

Assignment: MASK

WCCP Client ID: 10.1.4.22

Protocol Version: 2.0

State: NOT Usable

Redirection: L2

Packet Return: L2

Packets Redirected: 0

Connect Time: 00:04:59

Assignment: MASK

******************************************

New Member

Re: wccp and gre on 4500

WCCP is not supported on the Sup 6-E. I wonder why? I am trying to find out.

http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/12.2/46sg/configuration/guide/wccp.html

Regards, Andy

762
Views
0
Helpful
4
Replies