01-19-2017 04:20 PM - edited 03-05-2019 07:52 AM
Hi all, hope everyone is well !!
I have two devices that I need to redirect traffic to and I am wondering if it's possible to have more than one WCCP instances enable under the same interface. Please see example below, where wccp 53/54 are associated to one ACL and wccp 61/62 are associated to another ACL
int g0/0
ip wccp 53 redirect in
ip wccp 54 redirect in
ip wccp 61 redirect in
ip wccp 62 redirect in
Thanks everyone in advance !!!
Danny
Solved! Go to Solution.
01-25-2017 12:28 AM
I believe so.
One WCCP device should advertise it can process services a,b and the other WCCP device should advertise it can process services c and d.
The router will redirect the request to the device that says it can provide the service being redirected.
http://www.cisco.com/c/en/us/td/docs/ios/12_2/configfun/configuration/guide/ffun_c/fcf018.html
01-25-2017 12:28 AM
I believe so.
One WCCP device should advertise it can process services a,b and the other WCCP device should advertise it can process services c and d.
The router will redirect the request to the device that says it can provide the service being redirected.
http://www.cisco.com/c/en/us/td/docs/ios/12_2/configfun/configuration/guide/ffun_c/fcf018.html
01-25-2017 03:57 PM
Hi Philip,
Thanks Philip !! I appreciate the info !!
Danny
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide