Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Web access to switches

Hello,

What username and password is required on switches so you can browse to them via http?

rgds

Phil

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Web access to switches

Phil,

If you have local usernames configured on the switch, then you need to configure the following command which will prompt for username & password

username admin privilege 15 secret

ip http authentication local

HTH

Narayan

4 REPLIES
Gold

Re: Web access to switches

No username and enable password like password

M.

New Member

Re: Web access to switches

Can you explain your last comment more clearly - thanks.

I thought it was adding a privilege 15 level username, but that doesn't work.

Bronze

Re: Web access to switches

hi phil,

First you need to enable ur switch for using http server

then by using the enable password u set on the switch u can access the switch via http

No need of username to access the switch via http only by entering password is enough to login into the switch.

Hope this helps you,

Thanks,

Raj

Re: Web access to switches

Phil,

If you have local usernames configured on the switch, then you need to configure the following command which will prompt for username & password

username admin privilege 15 secret

ip http authentication local

HTH

Narayan

244
Views
0
Helpful
4
Replies
CreatePlease to create content