10-06-2006 03:40 AM - edited 03-03-2019 02:15 PM
Hello,
What username and password is required on switches so you can browse to them via http?
rgds
Phil
Solved! Go to Solution.
10-07-2006 04:49 AM
Phil,
If you have local usernames configured on the switch, then you need to configure the following command which will prompt for username & password
username admin privilege 15 secret
ip http authentication local
HTH
Narayan
10-06-2006 04:13 AM
No username and enable password like password
M.
10-06-2006 07:31 AM
Can you explain your last comment more clearly - thanks.
I thought it was adding a privilege 15 level username, but that doesn't work.
10-06-2006 08:04 AM
hi phil,
First you need to enable ur switch for using http server
then by using the enable password u set on the switch u can access the switch via http
No need of username to access the switch via http only by entering password is enough to login into the switch.
Hope this helps you,
Thanks,
Raj
10-07-2006 04:49 AM
Phil,
If you have local usernames configured on the switch, then you need to configure the following command which will prompt for username & password
username admin privilege 15 secret
ip http authentication local
HTH
Narayan
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: