If you wish to only monitor, then consider enabling netflow and using a netflow product such as ManageEngine Netflow Analyser or another. You will be able to see all the conversations that network nodes are having with each other.
I don't think you can graph the blocked sites but you can graph the http usage but not per user but per interface.
You can monitor the type of traffic along with packet count on a interface with NBAR only but you cannot monitor who is going where with this feature.Netflow would let you graph/monitor the IP addresses going to some IP addresses of webservers.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...