i posted this problem before but i am providing more details right now in the attachment.
question i have
1- how to enable users to access www.mycompany.com address from insdie the same as outside since the ISP DNS pointing back to me becasue as of now it could be access by the private IP address.
why i was not able to telnet the router public ip address untill i NAT port 23 to the ip address of the lan ..is this normal?
3- in theory i could nat a static public IP address in range differnet of the router's public ip address to a private IP addresss on the lan side...however it is not working as shown in the scanned doc.
No, you can not do like that. You can have one or the other but not both. Generally NAT router is configured to translate unregistered IP addresses (inside local addresses) that reside on the private (inside) network to registered IP addresses. NAT is designed to operate only on packets that traverse both a nat-inside and a nat-outside interface.
This document gives several answers on frequently asked questions for PFRv3 channel state behavior.
Q1: What are all the channel operational states from a BR (border role) perspective and what are the rules/conditions to be in each st...
The need was to reach an host inside a LAN through a VPN connection managed by the LAN gateway (Cisco 1921).
The LAN gateway performs NAT and there was a dedicate nat rule for the host i wanted to reach through VPN.
I couldn't connect to the hos...