Hello, have had this issue for a while I assume. But in any case, we have a Cisco ASR 1002 on the edge that does our routing and NAT, behind that we have a Cisco ASA 5585-X and then our LAN.
Trying ping 126.96.36.199 fails from my desktop behind the firewall, although I see the flow being created in the log for the ICMP packet. I also see the NAT translation on the edge router happening using show ip nat trans | inc 188.8.131.52.
I can however ping this IP from the edge router and the firewall.
I am attaching a doc that explains it better. You can also normally ping this IP from any other location, ex my cell phone.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...