Here's the additional configuration which makes the L2TP work:
protocol l2tpv2 1234
ip local interface FastEthernet4
And there're a static routes which points to ISPs l2tp server via the FastEthernet4 interface.
HERE'S THE PROBLEM ? When I'm enabling WFQ in the Virtual-PPP1 interface in the outbound direction (either by typing fair-queue on the interface level or by applying a policy-map which includes only the fair-queue statement for "class-default") the l2tp dialer disconnects and never get connected again until I reboot the router (simply typing "no fair-queue" doesn't helps). The router is still able to route to the l2tp gateway (it manages to get icmp replys to pings from it, at least) but the internet connection never come up again. I heard about "only FIFO queuing method is available for software-based interfaces" (such as the virtual-ppp) but why than it's available for me to enable WFQ on a virtual-ppp in a first place?
The router is 871W with c870-advsecurityk9-mz.124-4.T3.bin IOS.
We have 3 identical switches configured by someone else and would like to claim some of the Gigabit ports(G1/G2/G3/G4) for use on servers. When we try to change the wiring and configuration, we run in to connectivity issues. Attached is a des...
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...