Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

What Image for OSPF on my 3560?

I'm trying to run OSPF but when I try to configure it, this is what happens:

ALLEN-1.11.5-CoreSW(config)#router ospf 1

ALLEN-1.11.5-CoreSW(config)#

It has the IP BASE image. Do I need IP Services?

Here is a sh version:

ALLEN-1.11.5-CoreSW#sh ver

Cisco IOS Software, C3560 Software (C3560-IPBASE-M), Version 12.2(25)SEB4, RELEA

SE SOFTWARE (fc1)

Copyright (c) 1986-2005 by Cisco Systems, Inc.

Compiled Tue 30-Aug-05 14:19 by yenanh

ROM: Bootstrap program is C3560 boot loader

BOOTLDR: C3560 Boot Loader (C3560-HBOOT-M) Version 12.2(25r)SEC, RELEASE SOFTWAR

E (fc4)

ALLEN-1.11.5-CoreSW uptime is 3 days, 3 hours, 32 minutes

System returned to ROM by power-on

System image file is "flash:c3560-ipbase-mz.122-25.SEB4/c3560-ipbase-mz.122-25.S

EB4.bin"

cisco WS-C3560-24TS (PowerPC405) processor (revision D0) with 118784K/12280K byt

es of memory.

Processor board ID CAT1034ZHLB

Last reset from power-on

4 Virtual Ethernet interfaces

24 FastEthernet interfaces

2 Gigabit Ethernet interfaces

The password-recovery mechanism is enabled.

512K bytes of flash-simulated non-volatile configuration memory.

Base ethernet MAC Address : 00:19:2F:B3:F2:80

Motherboard assembly number : 73-9897-06

Power supply part number : 341-0097-02

Motherboard serial number : CAT10335QW4

Power supply serial number : AZS103003HV

Model revision number : D0

Motherboard revision number : A0

Model number : WS-C3560-24TS-S

System serial number : CAT1034ZHLB

Top Assembly Part Number : 800-26160-02

Top Assembly Revision Number : C0

Version ID : V02

CLEI Code Number : COMMG00ARB

Hardware Board Revision Number : 0x01

Switch Ports Model SW Version SW Image

------ ----- ----- ---------- ----------

* 1 26 WS-C3560-24TS 12.2(25)SEB4 C3560-IPBASE-M

Configuration register is 0xF

2 REPLIES
Hall of Fame Super Bronze

Re: What Image for OSPF on my 3560?

Do I need IP Services?

Yes.

__

Edison.

New Member

Re: What Image for OSPF on my 3560?

Thanks.

427
Views
0
Helpful
2
Replies