Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k

what is command to show any protocol on interface of GSR12000 with XR OS

I would like to know command which show any protocol on that interface (same as "ip cache-flow) of GSR 12000 with XR OS.

1 REPLY
Cisco Employee

Re: what is command to show any protocol on interface of GSR1200

If you setup netflow under the interface then you can use the command "show flow monitor cache format record location 0/0/cpu0" as an example.

http://www.cisco.com/en/US/partner/docs/routers/xr12000/software/xr12k_r3.9/interfaces/configuration/guide/hc39nflo.html

Here is an example of the command output:

http://www.cisco.com/en/US/partner/docs/ios_xr_sw/iosxr_r3.8/interfaces/command/reference/hr38nflo.html#wp1272518

Thanks,

Bryan

342
Views
0
Helpful
1
Replies
CreatePlease to create content